Ecotile is proudly made in Britain, by us. Each and every Ecotile floor tile is manufactured in our Bedfordshire ISO-accredited facility, to the highest quality standards. And every element of the product composition is strictly controlled. So we know exactly what’s in each tile.
That’s why every Ecotile is certified to meet exacting technical specifications. Whether it’s hardness, slip resistance, fire retardance or VOC emissions, we have all the relevant certifications to provide businesses with peace of mind. When you buy Ecotile, you’re buying guaranteed quality.
That’s why businesses choose Ecotile as their modular floor supplier. Ecotile means trust.
(Unlike some of the counterfeit copy tiles being imported, made from who knows what recycled junk. Yet being advertised as being ‘British-made with certification’!)
The only way to be sure is to check. Our certification, brochures, technical data sheets and useful guides are all below for you to read and download.
Technical Fact Sheet
Finish: Smooth or Raised Disk
Dimensions: 500mm x 500mm
Hardness: 90-92 Shore A
Anticipated Service Life: 25 years +
Not suitable for outdoor use.
Fire Performance: Does not support combustion and achieves Class 1 spread of flame when tested to BS 476: Part 7 / DIN 13501: 2007 – Bfl-S1
Sound Absorption: Noise reduction of up to 46db can be achieved.
Hardness: Standard ISO 868 89-92 Shore A.
Slip Resistance / Anti-Slip Qualities: R10 Rating EN 13893:2002 Dynamic Coefficient of Friction = 0.75 avg. EN 14041:2004 – Pass DIN 51130:2004
Abrasion Wear: Group T
Mechanical Resistance: 17 N/mm2 to DIN 53516.
Determination of Length, Squareness & Straightness: BS EN 428:1993 – <0.13% / 0.5mm max.
Determination of Residual Indentation: BS EN 433:1994 – <0.1mm
Compressive Strength: ISO 6721-1:1994, ISO 6721-2:1994, ISO 6721-6:1996: 520kg/cm²
Dimensional Stability: BS EN 434:1994 – Maximum change in dimension <0.1%.
Chemical Resistance: Good resistance to most commonly used chemicals. EN 13529 – Common acids oils & gas oil – No deterioration / Solvents – Not resistant to prolonged contact.
Colour Fastness: EN 20105-B021 – 5
Mechanical Resistance: Annex A.1 of BS IEC 61340-5-1:2001.
Resistance to Hot Objects/Solder: Good